Owner-operated. Clayton Waggoner has worked in the pool trade since 2012, serving Naples and Collier County.

Splash Pools LLC logo 239-450-5933

Bonita Springs, Florida

Pool remodeling in Bonita Springs

Bonita Springs is close enough to Naples that people assume the two are one market, and for pool work they are not. The fill water comes from a different utility and arrives at a different hardness, the disinfectant in it is not the one most pool owners assume, and the permit for your project is issued by the city rather than by a county. Those three differences change what fails here and who you have to satisfy to fix it.

Owner on every job Diagnosed before it is quoted One contractor, start to finish Splash Pools LLC, Florida LLC L12000084569

Why this area is different

A new interior is only as good as the water that fills it

This page is written for the projects that matter most on an older Bonita pool: a new interior finish, the waterline tile, the coping, and the spa that usually shares the same shell. The water and permit sections that follow come first for a reason. One decides how a new finish behaves in its first weeks, and the other decides who has to approve the work.

The National Plasterers Council recommends filling a new cement-based finish with water above 200 ppm calcium hardness, and it warns that soft water can leach calcium hydroxide from the upper surface of the finish. Bonita Springs Utilities publishes a working range of 80 to 100 mg/L for its own water, and at these concentrations mg/L and ppm describe the same quantity. That sits below the plasterers' line, so a new plaster or pebble interior here is filled with water that has to be brought up to where the finish needs it, not assumed to be ready.

None of that makes Bonita water bad for a pool. It makes the first weeks of a new finish a planned process: start-up chemistry is written for what the hose actually delivers, and the monochloramine in the supply, covered below, is part of that plan rather than a surprise on the first test.

The other half of a lasting interior is what sits behind it. A new finish over a shell that is still cracking, or butted against a tile line whose mortar bed has let go, fails from the edge in. That is why we look at the shell, the tile and the coping before quoting a finish, and why the three are usually priced as one project.

Fill water from a different utility, at a different hardness than Naples

Monochloramine rather than free chlorine in the supply

City permitting, not county permitting

A new interior, tile and coping planned as one project

Why does Bonita fill water behave differently than Naples fill water?

Because it comes from a different utility with a different published hardness. Bonita Springs Utilities states that the average hardness of its water is less than 100 mg/L, and in its own household guidance gives a working range of 80 to 100 mg/L, or five to six grains per gallon.

Set that beside the figure this site documents for Collier County, where the county's own reporting puts average hardness around 67 mg/L. Both are soft by BSU's published scale, which calls 110 mg/L or less soft and 200 mg/L or more hard. But they are not the same, and the direction of the difference matters: Bonita fill water carries more calcium into the pool than Naples fill water does.

That matters because calcium is one of the inputs to the saturation balance that decides whether water is chemically aggressive toward a cementitious finish. Water that arrives short of calcium will pull it from wherever it can, and in a plastered pool the most available source is the plaster. Starting from 80 to 100 mg/L rather than the high sixties is a slightly better starting position, not a free pass.

The practical version is simple. If you moved here from a Naples house and are running the same chemistry routine on a Bonita pool, your starting water is not the water you are used to. Test it rather than assuming it.

Aerial view of pools along a Southwest Florida shoreline
Aerial view of pools along a Southwest Florida shoreline.

What does monochloramine in the supply mean for filling a pool?

Bonita Springs Utilities disinfects with monochloramine, which it describes as a chemical that uses both chlorine and ammonia. Most pool owners assume tap water arrives carrying free chlorine, and on a chloraminated supply that assumption is wrong.

The distinction is worth knowing when you top up or refill, because the ammonia component does not simply disappear when the water enters the pool. Chloramines are also what people are describing when they complain about a pool that smells strongly of chlorine, which is generally a sign of combined chlorine rather than of too much sanitizer.

We are not going to publish a dosing rule for this, because the correct response depends on your sanitizer, your volume and your current readings, and a number invented for a web page is worse than no number. What we will say is that a large refill from a chloraminated supply is a moment to test rather than a moment to assume.

The same utility also adds corrosion inhibitors to the supply, which it explains are there to preclude the leaching of certain metals into the water, particularly lead, copper and iron. That is a drinking-water measure rather than a pool measure, but it is another way this water is not simply generic tap water.

Who issues the permit for a pool or deck job in Bonita Springs?

The City of Bonita Springs, through its own Community Development Department. That is the single most important administrative fact on this page, and it is the one most likely to be got wrong by a contractor who works mainly in Naples.

Bonita Springs is in Lee County, not Collier County. It follows that the material this site publishes about Collier County permitting does not govern a job here. Our posts on whether resurfacing needs a permit and on the $7,500 exemption are written against Collier's Land Development Code and Collier's published guidance, and we are flagging that here rather than letting you assume they transfer.

We are deliberately not publishing Bonita's thresholds, fee schedule or review timelines on this page. We have not obtained them first-hand, and importing Collier's numbers under a Bonita heading would be exactly the kind of place-name-swapping this site exists to avoid. Call the city's Community Development office, or ask us to, and get the answer from the office that will actually be reviewing the drawing.

What does transfer is the state layer. Florida's contractor licensing rules apply identically in Lee and Collier, which is why the license verification process is the same wherever you are standing.

Morning light across a fairway and its homes
Morning light across a fairway and its homes.

Does being near the Imperial River or the coast change the equipment decision?

It can, and the mechanism is corrosion rather than flooding as such. Salt-laden air attacks the metal on an equipment pad, and proximity to open water is the variable that matters most for that. Bonita has a lot of housing stock close to the coast and along the Imperial River corridor.

The failures show up on the pad first: heat exchangers, fasteners, bonding lugs, control boards and anything with a bare copper connection. We wrote that up in detail in pool equipment corrosion in a flood zone, and the physics is identical here.

Where a property sits in a mapped flood zone, elevation requirements become a design constraint on where equipment can go rather than a suggestion, and that is a question for the city rather than for a contractor's rule of thumb. Flood zone determinations are property-specific, and the city publishes flood information for exactly that reason.

The version of this that is worth acting on without any paperwork: if your pad is within sight of open water and nobody has looked at the bonding connections in several years, that inspection is cheap and the thing it prevents is not.

What usually needs doing on an older Bonita pool?

On an older Bonita pool the interior is usually the project. A finish that has gone rough underfoot, chalky, stained or etched has worn through its useful surface, and that is the work worth planning carefully, because doing a finish twice is the outcome every owner wants to avoid.

When the pool itself is the problem, the sequence is the same one we follow everywhere: establish whether the surface is the problem or a symptom, then decide. Resurfacing over a shell that is still moving buys a short-lived finish, which is why we chip out and repair before any new interior goes on.

Tile and coping usually come into the conversation at the same time, because the waterline is where a finish change is most visible and because the mortar bed behind the tile is often the thing that actually failed. Doing those as one project rather than three visits is the whole reason this company is set up the way it is.

If the deck and the pool are both due, they should be sequenced together. Rebuilding a base after a new interior has gone in means working heavy equipment around a finish you just paid for.

Sunrise over a Southwest Florida golf-course community
Sunrise over a Southwest Florida golf-course community.

How do you tell base settlement from a leak under a Bonita deck?

They present similarly and they are fixed completely differently, so this is worth separating early. Base settlement is usually broad and follows load: a dip that spans several units, worst where people walk or where a vehicle crosses, and stable in dry weather.

A leak-driven void tends to be more localized, often near the pool shell, a return line or a skimmer, and it frequently gets worse after heavy rain or after the pool has been topped up. If the deck movement sits directly over plumbing, that ordering is a clue rather than a coincidence.

The distinction is worth money because relaying pavers over a void that a leak is still feeding buys you a flat deck for one season. We cover the diagnostic side in leak detection, and the honest answer is that some of these need water loss measured over days rather than guessed at in an afternoon.

The one thing not to do is seal the joints and hope. Sealing a deck that is moving locks in the shape it currently has.

Plan the scope

What would your remodel actually touch?

Pick everything that bothers you about the pool. The tool shows which trades the fix involves and, more importantly, where they meet, because the seams are where split jobs fail.

Service area

Bonita Springs and the neighborhoods around it

The large marker is Bonita Springs; the small dots are named neighborhoods within it. Click any marker for details.

Where we work

Naples and Collier County, plus Marco Island, Bonita Springs, Estero and Fort Myers. What fails is different in each, and that is what decides the work.

  • Port Royal waterfront, architectural review, deck must match the house
  • Old Naples pools built in the seventies and eighties, due for everything at once; original skimmers
  • Aqualane Shores canal homes, deck movement near the seawall separates coping
  • Park Shore Gulf Shore Boulevard salt air hits the tile line first; seasonal vacancy
  • The Moorings direct salt air exposure, waterline tile failure
  • Coquina Sands seventies and eighties pools; decks poured over uncompacted fill
  • Royal Harbor canal homes, high water table hides leaks; coping separation
  • Grey Oaks gated architectural review on anything visible from the street; spa additions
  • Quail West natural stone decking matched to the house; spa additions
  • Pelican Bay empty April to November; automation and heat pumps for year-round swimmers
  • Lely Resort natural gas supply; builder decks aging out; year-round pump runtime
  • Fiddler's Creek natural gas heater sizing; builder-era paver decks losing their base
  • North Naples pools from the 1990s build-out on a second or third finish; Ian surge on the coast
  • The Vineyards year-round swimming, heat pumps and variable speed payback
  • Naples Park mature landscaping into pool plumbing; original skimmers; storm-loaded filters
  • Pine Ridge Estates mature landscaping finds underground pool plumbing
  • Vanderbilt Beach equipment pads corrode fast; storm season loads filters
  • Golden Gate Estates well water iron staining on marcite; propane rather than natural gas
  • Isles of Capri canal water table hides leaks; heavy equipment-pad corrosion
  • Marco Island barrier island salt air corrodes heaters from the inside out
  • Bonita Springs Bonita Springs Utilities fill water and monochloramine; city permits; interior, tile and coping as one project
  • Estero deck and patio base engineered for local soil
  • Fort Myers very soft reverse osmosis city water; city versus county permits; Ian surge up the Caloosahatchee
  • Ave Maria newer east-county builds, patios and walkways matched to existing hardscape

Neighborhoods in Bonita Springs

  • Bonita Bay Off US 41 on the west side of Bonita Springs, Lee County
  • Pelican Landing North end of Bonita Springs, Lee County
  • Highland Woods Central Bonita Springs, Lee County
  • Downtown and the Imperial River The older core around Riverside Park, Lee County
  • Spanish Wells South Bonita Springs near the county line, Lee County
  • Bonita Beach The barrier island along the Gulf, Lee County
  • Barefoot Beach Collier County side of the line, so Collier County permits apply
  • Hunters Ridge East of I-75, Lee County
  • Worthington East of I-75, Lee County
  • Palmira East of I-75, Lee County
  • Bonita National Eastern Bonita Springs, Lee County
4 neighborhoods with a published customer review Click any marker · positions are approximate

What that usually means in Bonita Springs

In the order the causes above tend to drive the work, not in the order of what costs most.

  1. Pool resurfacing in Naples, including the part everyone skips Most resurfacing quotes cover chipping out the old surface and troweling on a new one. The part that decides whether it still looks right in ten years is the four weeks after the water goes in, and it is the part most owners are never told about.
  2. Pool remodeling in Naples, handled as one project Most Naples pools do not fail one piece at a time. The interior finish goes, the waterline tile lets go, the coping sounds hollow, and the deck has been moving for years. Handling that as four separate trades is how a six week project turns into a season. We do it as one.
  3. Waterline tile replacement, starting behind the tile Tile almost never fails on its own. What fails is the mortar bed behind it, and in Naples the salt air reaches that bed long before it touches the tile face. That is why tile set back onto the old bed comes loose again, and why every job here starts with what is behind the tile.
  4. Pool coping replacement, and the beam underneath it Tap along your coping. Where it sounds hollow, the problem is not the coping and it is not the mortar. It is the bond beam underneath, and setting new stone on top of it changes nothing.
  5. Spa remodels and new attached spas in Naples A spa is a small pool with a much bigger heating problem. Get the sizing and the spillover right and it is warm when you walk out. Get them wrong and it is a feature nobody uses.
  6. Pool deck repair and resurfacing in Naples, and which one your deck needs Resetting pavers on a base that has failed is a repair with an expiry date. The question worth answering before anyone quotes is whether the base is sound.

What to expect when we work in Bonita Springs

The first difference is administrative. Because the permit authority is the city rather than a county, the review process and the inspection scheduling are the city's, and we plan around that office rather than around Collier's calendar.

The second is travel. Bonita Springs is at the northern edge of where we work, and we are straightforward about that: it means we schedule Bonita jobs in blocks rather than dropping in for an hour, and it means we would rather see the whole scope on one visit than make three assessment trips.

The third is the water. If a job includes a new interior finish, the fill is coming from Bonita Springs Utilities and its published hardness is not the figure a Naples pool starts from. Startup chemistry gets set against what the water actually tests at, not against a rule of thumb carried over from another town.

What is identical to everywhere else we work is the part we will not localize: how we quote, what we will not promise, and the fact that the license number is on every page of this site so you can check it before you call.

ASK CLAYTON · BONITA SPRINGS

Questions from Bonita Springs

These are specific to this area. The general ones are answered on the service pages.

Call 239-450-5933

Clayton Waggoner

Clayton replies himself

  1. Is Bonita Springs water hard enough to matter for a pool?

    It is soft by the utility's own scale but harder than Naples water, and the difference is worth knowing. Bonita Springs Utilities publishes an average hardness of less than 100 mg/L, with a working range of 80 to 100 mg/L or five to six grains per gallon, and calls 110 mg/L or less soft. Collier County's own reporting puts its average nearer 67 mg/L. Both are on the soft side, but a Bonita pool starts with more calcium in the fill than a Naples pool does, which is a slightly better starting position for a cementitious finish. It does not remove the need to test, it just changes where you are starting from.

  2. Do I need a Collier County permit for pool work in Bonita Springs?

    No. Bonita Springs is in Lee County and the City of Bonita Springs runs its own Community Development Department, so a job here is permitted by the city rather than by Collier County. This matters because most pool contractors marketing in this area work primarily in Naples, and Collier's rules, thresholds and processes do not carry across the county line. Anything you have read on this site about Collier permitting is written against Collier's Land Development Code and should not be applied to a Bonita address. Confirm the requirements with the city's Community Development office before anyone starts work.

  3. Why does my Bonita pool smell strongly of chlorine after a refill?

    A strong chlorine smell is usually a sign of combined chlorine rather than too much sanitizer, and on this supply there is a specific reason to think about that. Bonita Springs Utilities disinfects with monochloramine, which it describes as a chemical that uses both chlorine and ammonia, so a large refill introduces the ammonia component along with the water. We are not going to publish a dosing rule for correcting it, because the right response depends on your sanitizer type, your volume and your current readings. The useful habit is to test after a significant refill rather than assuming the water arrived neutral.

  4. Should the tile and coping be redone when a Bonita pool is resurfaced?

    Often, and it is worth deciding before the pool is drained rather than after. Resurfacing means the pool is empty and the waterline is exposed, which is the most practical moment there will be to replace tile or reset coping. The mortar bed behind waterline tile is frequently what has actually failed, and a new interior butted against loose tile or cracked coping can be compromised from the edge in. We look at all three at the assessment and price them as one project, so the decision is made with the numbers in front of you rather than halfway through the job.

  5. Does living near the water in Bonita change what equipment I should buy?

    It changes what you should inspect more than what you should buy. Salt-laden air attacks metal on the equipment pad, and proximity to open water is the strongest predictor of how fast that happens, so heat exchangers, fasteners, control boards and bonding connections all age faster near the coast and along the river corridor. If your property sits in a mapped flood zone, elevation requirements also constrain where equipment may be placed, and that is a property-specific determination the city holds rather than something a contractor should estimate. The cheap habit is having the bonding connections looked at rather than waiting for a board to fail.

  6. Do you actually work in Bonita Springs, or just advertise there?

    We work there, and it is the northern edge of our area, which we would rather say plainly than imply otherwise. In practice that means we schedule Bonita jobs in blocks rather than making repeated short trips, and we would prefer to assess the full scope in one visit instead of three. If your job is small and urgent, it is fair to ask us directly whether we are the right call that week, and we will tell you if we are not. The licensing and insurance position is identical wherever we work, and the license number is in the footer of this page.

Tap a question

Or just call 239-450-5933

What is the same everywhere we work

The neighborhood changes what fails. It does not change how we work, and pretending otherwise would be the first dishonest thing on this page.

  • No price before someone has looked at the pool.
  • No schedule before we know what the shell needs.
  • The cause gets diagnosed before the repair gets quoted.
  • Ask for our license number and check it yourself at the DBPR licensee search. Ask the other quotes for theirs too.

Nearby, and similar

These share the same underlying conditions as Bonita Springs, which is why the work tends to look alike.

  • Marco Island barrier island salt air corrodes heaters from the inside out
  • Estero deck and patio base engineered for local soil
  • Fort Myers very soft reverse osmosis city water; city versus county permits; Ian surge up the Caloosahatchee
  • Ave Maria newer east-county builds, patios and walkways matched to existing hardscape

Every area we cover

Talk to Clayton

Tell us what the pool in Bonita Springs is doing.

A sentence or two is enough. You get a call back from the person who does the work, not a dispatcher.

Call 239-450-5933